14 Piece E-Z Track® Plastic Pier Set
Fast and easy assembly and trouble-free set up. This pier set is compatible with most other popular track
with roadbed systems. With this pier set, you can create an over/under figure 8 track. The track attaches to a pivoting track bracket
for best support of track incline. Removable design for floor or carpet set up. These black plastic piers may
be nailed to your railroad layout for permanent installation. Assembly instructions are included.
NOTE: Clearance beneath the center pier sections is 3 3/8".
Item Number: 44471; Internet Price : 16.87
Suggested Retail Price: $22.50 - You Save 25%
|
|
18 Piece E-Z Track® Graduated Pier Set
Fast and easy assembly and trouble-free set up. This pier set is compatible with most other popular track
with roadbed systems. Use this for higher HO elevations and On30 clearances. The track attaches to a pivoting track bracket
for best support of track incline. Removable design for floor or carpet set up. Assembly instructions are included.
NOTE: Clearance beneath the center pier sections is 4 1/8".
Item Number: 44595; Internet Price : 22.68
Suggested Retail Price: $30.25 - You Save 25%
|
|
Pacer Technologies Rail Zip, 1oz.
RAIL ZIP is a high tech concentrated corrosion inhibitor and track
cleaner. RAIL-ZIP penetrates existing corrosion layers and restores
electrical conductivity to all model railroad tracks. It eliminates
arching and sparking to assure total layout integrity. The uses for
RAIL-ZIP extend beyond model railroading, anywhere you have electrical
contacts and corrosion problems you can use RAIL-ZIP. Auto and motorcycle
connectors, plugs and fuses can remain trouble free making sure your
new, classic or antique electrical systems won’t cause problems. Outdoor
lighting fixtures will be more reliable requiring less maintenance. Because
RAIL-ZIP works chemically and not mechanically, hard to reach contacts can
be easily treated.
Helpful Hints: Apply RAIL-ZIP to a clean cloth, cotton swab, felt pad or
sponge. Apply a thin even coating on the surface to be treated. Wipe up any
excess RAIL-ZIP with a water dampened cloth. If one part of a connector set
is not easily reached for treatment, repeated applications of RAIL-ZIP to,
along with repeated insertions of the accessible connector into the set will
coat both parts. For lighting fixtures, remove the bulb and apply RAIL-ZIP
to the contacts of the bulb only and insert or screw into the fixture. Repeat
as required to treat the fixture contacts. Wipe off all RAIL-ZIP that comes
in contact with the glass surface of the bulb. Do not use on halogen type
bulbs and sockets. For heavily corroded parts, allow RAIL-ZIP to work for 6
to 12 hours before restoring power to the circuit. NEVER WORK ON ANY PART
OF A LIVE OR ACTIVE ELECTRICAL CIRCUIT, DO NOT APPLY RAIL-ZIP TO ANY
CIRCUIT THAT IS OR MAY BE LIVE. MAKE SURE ALL POWER IS DISCONNECTED TO THE
PARTS YOU WILL BE TREATING, FAILURE TO DISCONNECT THE POWER CAN RESULT IN
SERIOUS INJURY OR DEATH.
Item Number: PT23; Internet Price : 3.14
Suggested Retail Price: $4.49 - You Save 30%
|
|
Wahl Oil
Lightly rub the rails with Wahl clipper oil after track cleaning. It inhibits oxidation, improves contact, and is
plastic compatible.
The Wahl brand is a natural oil that will not evaporate.
4 oz. squeeze bottle.
Item Number: 3310; Internet Price : 4.95
Suggested Retail Price: $7.99 - You Save 37%
|
|